What I Found
Keep holding for a true force restart
My iPhone Duo froze while I was out, and I had to look up the button sequence. In this quick video I show the buttons, swipe the power-off slider, and turn the phone back on.
An important clarification: the slider demonstration is a normal shutdown followed by a restart, not the button-only force restart for an unresponsive phone. As noted in the video description, Apple’s method is to quickly press and release Volume Up, quickly press and release Volume Down, then keep holding the Side Button until the Apple logo appears. Don’t stop at the slider or swipe it for that procedure.
I also mention seeing the startup screen on the inside display rather than the outside. That was an observation on my phone, not a confirmed general bug or a required part of restarting.
Some linked gear uses affiliate links, which may earn me a commission at no extra cost to you. BMX supplied the SolidSafe Duo for an earlier review.
What this video covers
- The button sequence and the power-off slider shown on my Duo.
- Turning the phone back on after the demonstrated shutdown.
- My inner- and outer-screen startup observation, with its uncertainty.
The short version
If the screen responds, the slider lets you shut down and then turn the phone back on. If it is unresponsive, use Apple’s button-only force restart and keep holding the Side Button until the Apple logo appears. The video description and the official guide below clarify the difference.